I have to admit that the richness of the use of radiation-proof lead plates, then how to use the radiation-proof lead plates, then the small series will be analyzed for everyone.

The wall is installed with the main iron keel of the angle iron. The angle between the angle iron and the lead plate is the same. The fixed angle of the stainless steel plate on the lead plate is also completed. The small pendant is completed and the hole is fixed by the screw. The lead plate that has been hung by the stainless steel plate angle iron is mounted on the angled iron with the screws installed on the supporting facilities, and the flatness and flatness can only be adjusted. Note: The angle steel model is as large as possible around 5#.

The key issues for installing a radiation-proof lead plate are as follows:

1. The radiation-proof lead plate is a ductile raw material with a large proportion. When disposing, it should be handled with care.

2. During installation, the laminated glass should be misaligned with the wall safety protection raw materials to prevent the radiation from leaking at the junction.

3. Because of the rich and colorful lead and antimony, lead glass is easily polluted by strong acid and alkali, and it is not easy to install or store in sour or wet natural environment.

4, the surface layer of anti-radiation lead plate is very easy to scratch, so in the whole process of construction must pay attention to, do not touch sharp objects, you must be careful.